Multi-GNSS + Magnetometer Module

Key specifications
• GNSS: GPS, GLONASS, Galileo and BeiDou
• Receiver: u-blox DAN-F10N
• Magnetometer: IST8310 3-axis
• Interface: UART, 38400 baud default
• GNSS signals: UART TX/RX
• Compass signals: I2C SDA/SCL
• Connector: JST-SH-6P, 1.00 mm pitch
• Status: red PPS LED, blinking at 1 Hz after 3D fix
• Protocol/output: UBX at 5 Hz default or NMEA at 1 Hz
• Dimensions: 21 × 21 × 15.4 mm
• Current consumption: 13 mA typical
• Operating temperature: -40°C to +85°C
• Weight: 25 g

Features
• Compact dual-band GNSS receiver with integrated 3-axis compass
• High-performance u-blox DAN-F10N navigation receiver
• Concurrent reception of GPS, GLONASS, Galileo, BeiDou, NavIC and QZSS
• Patch antenna and magnetometer provide positioning and heading information

Applications
Automotive, recreational, UAV and handheld systems.

Magnetometer Multi-GNSS Antenna Module

Key specifications
• Frequency: 1561-1602 MHz
• Gain (zenith): 2.5 dBic typical
• Axial ratio: ≤15 dB
• Return loss: ≤-6 dB
• Polarization: RHCP
• Conditions: 70 × 70 mm ground
• Supply voltage: 4.5 V ±0.5 V
• Noise figure: 1.5 dB maximum
• Output VSWR: 1.5 maximum
• Dimensions: 35 × 35 × 4 mm + 25 × 25 × 4 mm (two layers)
• Current consumption: 40-50 mA maximum
• Operating temperature: -40°C to +85°C

Features
• High gain and low noise
• Concurrent reception of multiple GNSS constellations
• Multi-band RTK for fast convergence and reliable performance
• Centimeter-level positioning accuracy
• Designed for convenient RTK integration
• Cable lengths and connectors can be customized
• RoHS compliant
• RS232, TTL and USB electrical levels available
• Navigation status LED and SRAM backup battery available

Applications
Automotive, recreational, marine and handheld systems; robotic lawnmowers, UAVs and automated machinery.

GPS Smart Antenna Module

Key specifications
• GNSS: GPS, GLONASS, Galileo and BeiDou
• Receiver: u-blox M10 series (SAM-M10Q)
• Magnetometer: IST8310 3-axis
• Interface: UART, 9600 baud default
• GNSS signals: UART TX/RX
• Compass signals: I2C SDA/SCL
• Supply voltage: 4-9 V
• Status: red PPS LED, blinking at 1 Hz after 3D fix
• Protocol/output: UBX or NMEA, 1 Hz default
• Connector: JST-SH-6P
• Dimensions: 20 × 20 × 10.4 mm
• Current consumption: 13 mA typical
• Operating temperature: -40°C to +85°C
• Weight: 8 g

Features
• High-performance 3-axis magnetometer
• Concurrent reception of GPS, GLONASS, Galileo and BeiDou
• Multi-constellation GNSS receiver
• High sensitivity and fast L1 acquisition
• Improved satellite availability
• Super-signal technology enhances RF performance and dynamic positioning accuracy in non-line-of-sight environments

Installation notes
Mount flat with the arrow orientation set in the autopilot. Keep the magnetometer at least 10 cm from power lines, ESCs, motors and magnetic materials. The M10 receiver has no onboard flash; apply UBX configuration after power-up. To reset, short RST to GND for at least 100 ms.

Applications
Urban canyons and other challenging positioning environments.

GPS/GLONASS + Compass Smart Antenna

Key specifications
• Frequency: 1575-1610 MHz
• Gain (zenith): 5.0 dBic typical
• Gain at 10° elevation: -1.0 dBic typical
• Bandwidth (10 dB return loss): 35 MHz minimum
• Polarization: RHCP
• Conditions: 70 × 70 mm ground
• Voltage supply: 0.5 V
• Noise figure: 1.5 dB maximum
• Output VSWR: 1.5 maximum
• Dimensions: 25 × 25 × 4 mm
• Power consumption: 40-50 mA maximum
• Operating temperature: -40°C to +85°C

Features
• High gain and low noise
• U-blox AssistNow Online/Offline A-GNSS support and OMA SUPL 1.0 compliance
• Data logging
• Open-sky cold start: 29 seconds
• Accuracy: 2.5 m CEP
• RoHS compliant
• RS232/TTL electrical levels available
• GPS navigation status LED and SRAM backup battery available

Applications
Automotive, recreational, UAV and handheld systems.